<
电话Service Hotline

0755-89263537

Home > News > Content

Shenzhen Electric Technology Co., Ltd.
Contact: Mr. Li
Website: www.sztrddq.com
Tel: 18126002290 0755-89263537
Address: No. 16th, Shenzhen Road, Tin Tau Community, Shi Jing Street, Ping An district, Mt.

35KV Inflatable Cabinet Supply 110KV inflatable cabinet Price
Edit:Shenzhen Electric Technology Co., Ltd.   PublicDate:2019-03-15

Shenzhen35kv Inflatable Cabinets, Supply 110kv inflatable cabinet price, inflatable cabinet monopoly, Shenzhen Ruizhi Electric Technology Co., Ltd. is a professional development, production and sales of high-voltage complete sets of power equipment and components of high-tech enterprises, supporting advanced assembly lines. The computer network management system, CAD, ERP and other systems are used to control the production process of the product. Production technology level in the domestic power equipment manufacturing industry in a leading position.

From abroad, 35KV inflatable cabinets developed quickly, there are quite a number of manufacturers, and has been widely used, a considerable number of products have entered the domestic, and China's inflatable cabinet industry development is relatively late, according to the China high-voltage switch industry association, China's 2001-year inflatable cabinet production of zero, starting from 2002, Two manufacturers designed and manufactured their products in 2002. Type experiment.
35KV Inflatable cabinet design and manufacturing requirements
(1) Shell design temperature
The maximum possible temperature of the housing under rated operating conditions. Indoors, the temperature rise of the housing is usually caused by the upper limit of the housing temperature plus the current flowing through the rated current. Outdoor environment should also consider the impact of sunlight and treatment conditions.
(2) Shell design pressure
The pressure used to determine the thickness of the housing. It is at least equal to the pressure before the gas is released in the event of an internal failure.
(3) The strength of the housing and components shall be tested in a specified way, whether or not calculated and confirmed.
(4) For welded shell welds, in addition to the parts that cannot be detected, non-destructive testing shall be carried out according to the boundary; the sealing oral welds and welded welds of the two materials shall be thoroughly inspected; the remaining weld lengths to be inspected shall be greater than 20% of the total length of the welded welding.